enginehistory.org Forum Index enginehistory.org
Aircraft Engine Historical Society Members' Bulletin Board
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Wright R-2600
Goto page Previous  1, 2, 3, 4, 5, 6, 7
 
Post new topic   Reply to topic    enginehistory.org Forum Index -> Collections/Restorations - General
View previous topic :: View next topic  
Author Message
jwilcox



Joined: 11 Mar 2010
Posts: 87
Location: Fredericton NB Canada

PostPosted: Sun Jul 26, 2015 17:54    Post subject: Houlton Reply with quote

Last year before the engine was running I attended the Houlton Maine Wings and Wheels show, yesterday I was back there to the delight of many who said they had been waiting a year to see it run. The weather put a damper on the aerial portion of the day and the attendance suffered a bit but I made 3 good runs to an appreciative audience. Flooded it pretty good on the last start as was evident by the dark smoke from the exhaust but a bit of throttle and mixture off it soon cleared. The runs were about 4 minutes each and it took 6.3 gallons of avgas, about 1/2 gallon per minute. This is just about what I thought it was using.
Another great day at Houlton, hope to do it again.
http://www.enginehistory.org/BBimages/WilcoxJ/Sam_0175.jpg
http://www.enginehistory.org/BBimages/WilcoxJ/Sam_0183.jpg
http://www.enginehistory.org/BBimages/WilcoxJ/Sam_0189.jpg
Back to top
View user's profile Send private message
jwilcox



Joined: 11 Mar 2010
Posts: 87
Location: Fredericton NB Canada

PostPosted: Fri Apr 22, 2016 05:45    Post subject: First run 2016 Reply with quote

Last fall before storing the engine for the winter I tried one last start and discovered I had a fuel pump with a ruptured diaphragm. Over the winter I found another pump and am good to go once again. Made the first run of 2016 yesterday and all went well but I need to be a bit more careful where I set up, the prop even though it's arc is inside the trailer frame was picking up small sand/stones from in front of the trailer so I had to limit the RPM 1800 - 2000 for the run. Yuotube video here if interested. https://www.youtube.com/watch?v=aM6zntZIQI0&feature=youtu.be
Jerry
Back to top
View user's profile Send private message
jwilcox



Joined: 11 Mar 2010
Posts: 87
Location: Fredericton NB Canada

PostPosted: Tue Dec 06, 2016 21:43    Post subject: Reply with quote

It's been a while since my last note on the 2600, another summer season has gone by and the engine is still running great and always leaves an impression on those who watch the run. I have it pretty much figured out for starting and although it's been a bit stubborn a time or two it's always cooperated. Have quite a few miles on the trailer now and have had no issues there either, now have a custom tarp for trailering in bad weather. The video attached is a run at a flyin in September.
Jerry
https://drive.google.com/file/d/0B32DRcm-WvGIVjN5aTNDM2xaQ2s/view
Back to top
View user's profile Send private message
ckuhns



Joined: 13 Jul 2003
Posts: 35

PostPosted: Tue Oct 10, 2017 08:04    Post subject: Reply with quote

This engine is now for sale

https://www.barnstormers.com/cat.php?mode=search
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    enginehistory.org Forum Index -> Collections/Restorations - General All times are GMT - 6 Hours
Goto page Previous  1, 2, 3, 4, 5, 6, 7
Page 7 of 7

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group