enginehistory.org Forum Index enginehistory.org
Aircraft Engine Historical Society Members' Bulletin Board
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Spark plug location

 
Post new topic   Reply to topic    enginehistory.org Forum Index -> Technical Discussion
View previous topic :: View next topic  
Author Message
jjuutinen



Joined: 13 Jul 2003
Posts: 180

PostPosted: Thu Aug 11, 2005 02:22    Post subject: Spark plug location Reply with quote

Of the major liquid cooled V-12s of WW Two, only the Jumo 213 had centrally mounted (between valves) spark plugs. Since every book on engine design says it is the ideal location, why did others keep mounting the plugs on the sides of the combustion chamber?
Back to top
View user's profile Send private message
szielinski



Joined: 13 Jul 2003
Posts: 94
Location: Canberra, Australia

PostPosted: Thu Aug 11, 2005 23:56    Post subject: Reply with quote

I haven't looked that deeply, but normally having a single OHC in the way would prevent optimal spark plug location. Given that the 213 only had 1 exhaust valve, maybe there was more room outboard to put a spark plug in a good location.

I remember something about early aviation engines using the spark plug through the side to locate the liner so it wouldn't move - perhaps a throw-back to that philosophy ?

Got a cutaway diagram of the head ? (I couldn't find one).
Back to top
View user's profile Send private message Send e-mail
jjuutinen



Joined: 13 Jul 2003
Posts: 180

PostPosted: Fri Aug 12, 2005 13:11    Post subject: Reply with quote

You mean a Jumo 213 cutaway? I don´t have a really good one but some details can be found in Karl-Heinz Regnat´s book on the Do 335. The English edition is available from Schiffer.
Back to top
View user's profile Send private message
jrussell



Joined: 26 May 2004
Posts: 55
Location: Portland, Oregon

PostPosted: Fri Aug 12, 2005 22:29    Post subject: Reply with quote

Spark plug location is a function of chamber configeration, as well as other pesky details such as cooling jacket placement, head bolt placement, port location, etc. Juggling all these requirements is one of the most diffucult trade-offs the engine designer has to make as it effects almost every other detail. An example of a engine which a central plug location was not the best location is the late model Hemi (426), which a single plug design (in the center of the chamber) was changed to a twin plug design(one one each side of chamber centerline).In a small block Chevy, the change to a "slant plug" configuration was demonstrably superior( a wedge chamber design), although this location is not even close to being centered in the chamber.In a pent roof four valve chamber the central location is probably the best location, but how many of the WW2 designs were of that configuration?
_________________
It runs best just before it blows!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    enginehistory.org Forum Index -> Technical Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group